Skip to content
Altomer Polyplast — Masterbatch | Additives | Compounds
Black masterbatch pellets

Agri & Pipe

Carbon Black Masterbatches

Fine 20 nm furnace carbon black, dispersed to ISO 18553 grade 2 or better, gives drip laterals, conduits and mulch films the UV protection and surface finish they need, with no screen-pack choking on long extrusion runs.

Carbon black
40%
Particle size
20 nm
UV stability
5+ yrs

The Range

What our black masterbatches cover

  • 40% fine-particle furnace carbon black (20 nm)
  • Dispersion rating of 2 or better per ISO 18553
  • Drip lateral pipe grades to IS 12786 / ISO 4427
  • UV-stabilising grades for agricultural mulch films
  • High jetness grades for extrusion and moulding

Grades

Representative grade

Typical properties, test methods and let-down ratios are published on each grade's technical data sheet.

FAQ

Questions about black masterbatches

  • What is black masterbatch?

    Black masterbatch is a concentrate of carbon black in a carrier polymer. It colors plastics black and protects them from UV light. Altomer MB-BLK40-AG carries 40% furnace carbon black with a 20 nm primary particle size in an LLDPE/HDPE carrier.

  • How much black masterbatch does drip irrigation pipe need?

    A let-down of 5.0% – 6.25% of MB-BLK40-AG delivers 2.0% – 2.5% active carbon black in the pipe, the level Altomer's TDS gives for drip laterals to IS 12786 / ISO 4427. The working: 2.5% target ÷ 40% carbon black = 6.25%.

  • Why does carbon black dispersion matter?

    Undispersed carbon black leaves agglomerates that show up as surface defects, weak spots and rising screen-pack pressure. MB-BLK40-AG is rated ≤ 2 for dispersion per ISO 18553 and has a filter pressure value below 1.0 bar/g.

  • Can the same grade be used for mulch film and conduit?

    Yes. At 4.0% – 6.0% in 15 – 30 μm mulch film it gives more than 99.5% optical opacity for weed suppression, and 2.0% – 4.0% suits HDPE conduits. Keep bags sealed: carbon black is hygroscopic.

  • What carbon black content does HDPE pipe need?

    It depends on the standard and the use. For drip lateral pipe to IS 12786 / ISO 4427, Altomer's TDS gives 2.0% – 2.5%, delivered by a 5.0% – 6.25% let-down of MB-BLK40-AG. For HDPE conduits and utility extrusion, a 2.0% – 4.0% let-down puts the carbon black content in HDPE pipe at 0.8% – 1.6%.

  • Do you supply black masterbatch across India?

    Yes. Altomer is a black masterbatch supplier and manufacturer in Rajkot, Gujarat. MB-BLK40-AG ships in 25 kg UV-stabilized laminated PP woven bags to pipe, conduit and film converters across India.

Free Sample

Have a line trial coming up? Let's match the grade to it.

Send your polymer, process and target let-down. Our lab confirms, tests and formulates the grade and dispatches a sample.