Skip to content
Altomer Polyplast — Masterbatch | Additives | Compounds
MB-BLK40-AGGrade: Pipe & Agri Extrusion

40% Carbon Black Masterbatch

Agricultural Mulch Films & Drip Irrigation Lateral Pipe Grade

40% Carbon Black Masterbatch pellets
Carbon Black
40%
Particle Size
20 nm
Dispersion
≤ 2 (ISO 18553)
UV Stability
5+ years
Standards
IS 12786 / ISO 4427

1. Product Description & Characteristics

Altomer MB-BLK40-AG is an extrusion-grade polyethylene masterbatch carrying 40% fine-particle, high-surface-area furnace carbon black (P-type). Specifically engineered for micro-irrigation drip tubes, HDPE conduits, and UV-stabilized agricultural mulch films. Delivers exceptional macro-dispersion (ISO 18553), high thermal resistance, and uniform surface smoothness without screen-pack choking.

2. Typical Physical & Rheological Properties

Carbon Black Content
40.0%± 1.5%
ASTM D1603 / ISO 6964
Primary Carbon Particle Size
20nm± 2.0
ASTM D3849 / TEM
Carrier Polymer System
Polyethylene (LLDPE / HDPE)
FTIR Identification
Specific Gravity (Density @ 23°C)
1.18g/cm³± 0.03
ASTM D792 / ISO 1183
Melt Flow Index (190°C / 21.6 kg)
22.0g/10 min± 4.0
ASTM D1238 / ISO 1133
Melt Flow Index (190°C / 2.16 kg)
0.80g/10 min± 0.30
ASTM D1238 / ISO 1133
Moisture Content / Volatiles
≤ 0.10%Max
ASTM D6980 (Moisture Analyzer)
Filter Pressure Value (FPV @ 14 μm)
< 1.0bar/gMax
EN 13900-5
Dispersion Rating (Microtome)
≤ 2.0 (Grade A2 / B1)GradeMax
ISO 18553
Ash Content (Inorganics)
≤ 0.10%Max
ASTM D5630
Thermal Heat Stability
280°C5 min dwell
DIN 53772
How our lab measures these values

3. Recommended Let-Down & Standards Compliance

ApplicationLet-Down Ratio
  • Drip Lateral Pipes (IS 12786 / ISO 4427)

    Delivers ≥ 2.0% – 2.5% active carbon black

    5.0% – 6.25%

  • Agricultural Mulch Films (15 – 30 μm)

    > 99.5% optical opacity for weed suppression

    4.0% – 6.0%

  • HDPE Conduits & Utility Extrusion

    2.0% – 4.0%

Work out your dosage in the LDR calculator

4. Regulatory, Packaging & Storage

Environmental
RoHS (2011/65/EU) & REACH compliant; non-toxic.
Packaging
25 kg UV-stabilized heavy-duty laminated PP woven bags.
Hygroscopic Care
Reseal bags immediately after opening to prevent moisture absorption; pre-drying recommended if stored long-term.

Related grades

All products →

FAQ

MB-BLK40-AG, answered.

  • Do you make an IS 12786 carbon black masterbatch for drip irrigation pipe?

    Yes, MB-BLK40-AG. For drip laterals to IS 12786 / ISO 4427, a 5.0% – 6.25% let-down delivers ≥ 2.0% – 2.5% active carbon black in the pipe, with dispersion rated ≤ 2 per ISO 18553. Whether the finished pipe meets the standard also depends on your resin and process, so confirm it in a line trial.

  • Can MB-BLK40-AG be used as carbon black masterbatch for mulch film?

    Yes. At 4.0% – 6.0% in 15 – 30 μm agricultural mulch film it gives more than 99.5% optical opacity for weed suppression, and its 20 nm carbon black provides 5+ years of UV stability.

Free Sample

Have a line trial coming up? Let's match the grade to it.

Send your polymer, process and target let-down. Our lab confirms, tests and formulates the grade and dispatches a sample.